SSANGYONG Kyron Repair Manual page 679

Fuel Level Gauge
The fuel level gauge displays the resistance value of the float on the fuel sender in the fuel tank through a pointer.
Note that this vehicle doesn't have a service hole for checking the fuel sender connector in the fuel tank.
The fuel sender and its connector can be checked and replaced only when the fuel tank is removed. The power
supply and resistance value should be measured at the connector in front of the fuel sender (refer to wiring diagram).
When the power supply and output resistance are normal, the float operation by fuel level may be defective; if so,
replace the fuel sender.
Tolerance and resistance value by indicating angle
Scale Full
Indicating angle (°) -
Tolerance (°) -
Resistance (Ω) 38
This table shows the tolerance and resistance value changes by fuel level in normal conditions. Therefore, the
differences that can be occurred by the road conditions and fuel fluctuations are ignored.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Tolerance and resistance value by indicating angle
(VIN = 13.5 ± 0.1 V, temperature: 25°C)
Full (Gauge) (3/4)
105 78.75
+4, 0 -
43 67
1/2 (1/4) Empty (Gauge)
52.5 26.25
±5 -
99.5 150
7
8010
Empty
0 -
0, -4 -
276.3 283
CLUSTER
KYRON SM - 2005.09