Removal and Installation
Preceding Work: Disconnect the negative battery cable and remove the instrument panel assembly.
1. Unscrew three mounting bolts (10 mm) on air conditioner module assembly and remove the sensor wire of air
conditioner module. Separate the blower unit from the heater unit.
Heater unit side
2. Separate the upper case and lower case of blower unit and remove the Intake Sensor from the evaporator.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Blower unit
Mounting Bolt at Bottom of
A/C Module
Intake Sensor
Evaporator
AIR CONDITIONING SYSTEM
39
6810
KYRON SM - 2005.09