Alarm Interval; Troubleshooting Of Sensor - SSANGYONG Kyron Repair Manual

Hide thumbs Also See for Kyron:

Table of Contents

3. ALARM INTERVAL

Alarm interval and display changes according to the distance as below:

While reversing, if obstacles are within stage 1, the warning beep sounds with long intervals. If within stage 2, the

warning beep sounds with short intervals and if within stage 3, the warning beep sounds continuously.

L, C, R sensor

When the power is applied (gear selector lever is in "R" position), the sensor will be diagnosed once. If found any

failure due to open circuit to sensor or communication error, warning buzzer sounds for 3 seconds and the data on

failed sensor transmits to the instrument panel to light up the corresponding LED. If normal, the warning buzzer

sounds only for 65 ms.

1. Whenever the power is applied, the diagnosis mode is

2. Sensor failure conditions (conditions for warning beep

due to failure)

1) Sensor failure conditions (conditions for warning beep

due to failure)

2) Open in sending circuit

3) Open in receiving circuit

4) Open in power circuit (+, -)

Warning beeps

(also when diagnosing the unit)

EFFECTIVE DATE

AFFECTED VIN

Interval (msec)

Back sonar (RH)

Back sonar (center)

Back sonar (LH)

PARKING AID SYSTEM

KYRON SM - 2005.09

Table of Contents