Door Lock Assembly - SSANGYONG Y200 Manual

SSANGYONG Y200

DOOR LOCK ASSEMBLY

Removal and Installation
1. Remove the negative (-) terminal of battery
2. Remove vinyl seal and internal trim of door
3. In case door lock of central locking system,
separate connector of door actuator and then
remove actuator.
YAD9C670
4. After releasing fixing bolt of door lock, separate
glass panel.
Door Lock Bolt
YAD9C680
5. After removing rod and cable from the door lock
assembly, remove door lock assembly.
1) Separate rod of the external door handle.
YAD9C690
2) Remove the connector.
3) After removing internal cable of handle, remove
door lock assembly.
YAD9C700
BODY EXTERIOR 9C-25
7 - 9 N•m
(44 - 52 lb-ft)