Configuring an NTP Server
Select Configure > System > NTP to configure an NTP server.
FIGURE 60
The table shows the following information.
A
Polling Time
•
•
•
You can view the details of:
•
Click NTP Server to display the NTP server information.
PowerConnect B-Series FCX Web Management Interface User Guide
53-1002268-01
Configuring a Network Transfer Protocol (NTP) server
This parameter allows you to specify the minimum poll interval for NTP messages.
Synchronize
System is synchronized to an NTP peer.
Apply
To save your configuration, click Apply.
Reset
To undo your changes, click Reset.
NTP Server
Configuring an NTP Server
4
79