Config Slb Pool Lb-Method - Extreme Networks ExtremeWare Command Reference Manual

config slb pool lb-method

config slb pool <pool name> lb-method [round-robin | ratio | priority |
least-connections]
Description
Configures the SLB load balancing method.
Syntax Description
pool name
round-robin
ratio
priority
least-connections
Default
N/A.
Usage Guidelines
Use this command to change the load balancing method after you have already created a pool.
To set the ratio or priority of a node, use the following command:
config slb pool <pool name> member
Example
The following command changes the load balancing method for the pool "ftp" to ratio:
config slb pool ftp lb-method ratio
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies a pool.
Specifies the round robin load balancing method.
Specifies the ratio load balancing method.
Specifies the priority load balancing method.
Specifies the least connections load balancing method.
config slb pool lb-method
407