Configure Account Password-Policy Char-Validation - Extreme Networks ExtremeWare Command Reference Manual

Commands for Accessing the Switch

configure account password-policy char-validation

configure account [all | <name>] password-policy char-validation [none |
all-char-groups]
Description
Requires that the user include an upper-case letter, a lower-case letter, a digit, and a symbol in the
password.
Syntax Description
all Specifies all users (and future users).
name Specifies an account name.
none Resets password to accept all formats.
all-char-groups Specifies that the password must contain at least two characters from each of the four
groups.
NOTE: The password minimum length will be 8 characters if you specify this option.
Default
N/A
Usage Guidelines
This feature is disabled by default.
Once you issue this command, each password must include at least two characters of each of the
following four types:
• Upper-case A-Z
• Lower-case a-z
• 0-9
• !, @, #, $, %, ^, *, (, )
The minimum number of characters for these specifically formatted passwords is 8 characters and the
maximum is 32 characters.
Use the option to reset the password to accept all formats.
none
Example
The following command requires all users to use this specified format for all passwords:
configure account all password-policy char-validation all-char-groups
History
This command was first available in ExtremeWare 7.4.
74 ExtremeWare 7.5 Command Reference Guide