Summary Of Route Redistribution Commands; Configuring Vrrp - Avaya G450 Manual

Configuring the router
Set the default metric value before redistribution, using the default-metric command from
within the Router RIP or Router OSPF contexts. This value is used for all types of redistributed
routes, regardless of the protocol from which the route was learned.

Summary of route redistribution commands

For more information about these commands, see Avaya G450 CLI Reference, 03-300437.
Table 126: Route redistribution CLI commands
Root level
command
router ospf
router rip

Configuring VRRP

Virtual Router Redundancy Protocol (VRRP) is an IETF protocol designed to support
redundancy of routers on the LAN and load balancing of traffic. VRRP is open to host stations,
making it an ideal option when redundancy, load balancing, and ease of configuration are
required.
498 Administration for the Avaya G450 Media Gateway
Command
redistribute
default-metric
redistribute
default-metric
Description
Enable OSPF and enter the router
configuration context
Redistribute routing information from other
protocols into OSPF
Configure the metric to be used in updates that
are redistributed from one routing protocol to
another
Enable RIP and enter the router configuration
context
Redistribute routing information from other
protocols into RIP
Configure the metric to be used in updates that
are redistributed from one routing protocol to
another