Renault Laguna III Manual page 2929

Engine wiring: Removal - Refitting
F4R or M4R
F4R, and 6-SPEED AUTOMA TIC GEARBOX
a Disconnect the R 262 connector (55) .
WIRING HARNESS
125835
88A-23
a Unclip the passenger compartment wiring harness
at (56) .
a Remove the nut (57) from the wiring channel on the
front left-hand side member.
a Move aside the wiring channel of the front left-hand
side member.
WARNING
To prevent any damage during the removal oper-
ation, check that the wiring is free from its mount-
ings (retaining clip, plastic clip, adhesive tape,
connector, etc.).
a Remove the engine wiring.
REFITTING
I - REFITTING PREPARATION OPERATION
a If replacing with more wiring, lock the unused con-
nectors (see Connectors: Sealing and immobili-
sation) (Technical Note 6015A, 88A, Wiring).
II - REFITTING OPERATION FOR PART
CONCERNED
a
WARNING
To prevent damage to the wiring harness when
refitting, observe the original routing.
88A
125819