Engine wiring: Removal - Refitting
F4R or M4R
a Unclip the fuse holders at (2) .
a Disconnect the passenger compartment wiring har-
ness from the max fuse box.
a Remove the bolt (3) from the max fuse box.
a Move the max fuse box to one side.
M4R
a Remove:
- the bolts (4) on the crankshaft position sensor pro-
tector,
WIRING HARNESS
125820
123545
88A-17
- the crankshaft position sensor protector.
F4R
a Remove the bolts (5) on the intercooler outlet air
pipe.
a Move the intercooler outlet air pipe to one side.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
WARNING
To prevent any risk of noise, premature wear,
short circuits, etc. after the refitting operation,
mark the wiring routing and how to connect the
connectors.
88A
123726