Renault Laguna III Manual page 2905

ENGINE COMPARTMENT CONNECTION UNIT
Protection and Switching Unit: Removal - Refitting
a Disconnect the connectors (6) .
a Remove the Protection and Switching Unit.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Connect the Protection and Switching Unit connec-
tors.
124321
a
WARNING
To guarantee a good electrical connection, make
sure that the wiring does not place any stress on
the connectors or the surrounding components.
a Clip in order:
- the front section of the Protection and Switching
Unit (7) ,
- the rear section of the Protection and Switching
Unit (8) ,
- the Protection and Switching Unit cover.
a Clip the wiring clip onto the battery tray.
124321
87G-3
87G
124320