Renault Laguna III Manual page 2897

Table of Contents

Advertisement

PARKING DISTANCE CONTROL
Parking distance control buzzer: Removal - Refitting
FRONT AND REAR PROXIMITY RADAR or REAR PROXIMITY RADAR
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the plastic rivets (4) .
a Disconnect the connector (5) from the parking dis-
tance control buzzer.
a Remove the parking distance control buzzer.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Connect the parking distance control buzzer con-
nector.
a Refit:
- the parking distance control buzzer,
- the parking distance control buzzer plastic rivets.
II - FINAL OPERATION
B91 or K91
a Refit the right-hand rear quarter panel trim (see
Quarter panel trim: Removal - Refitting) (71A,
Body internal trim).
D91
a Refit the rear parcel shelf trim (see Rear parcel
shelf trim: Removal - Refitting) (71A, Body inter-
nal trim).
FRONT AND REAR PROXIMITY RADAR
a Refit:
- the driver's A-pillar air distribution duct (see Front
footwell air distribution duct: Removal - Refit-
ting) (61A, Heating),
- the absorbing material.
LEFT-HAND DRIVE, and FRONT AND REAR
PROXIMITY RADAR
124780
a Refit the dashboard lower trim (see Dashboard
lower trim: Removal - Refitting) (57A, Interior
equipment).
87F-7
87F

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents