Honda ACCORD HYBRID 2005 Service Manual page 51

• ENGINE •
12. Measure the voltage between starter cut relay 4P
socket terminal No. 1 and body g r o u n d w i t h the
ignition switch turned to START (III).
S T A R T E R C U T R E L A Y 4P S O C K E T
1
2
4 3
Terminal side of f e m a l e t e r m i n a l s
Is there battery voltage?
Y E S — G o to step 13.
NO—Check for an open in the BLK/WHT w i r e
between the under-dash fuse/relay box and the
ignition switch. If the wire is OK, replace the under-
dash fuse/relay b o x . B
13. Check for continuity between starter cut relay 4P
socket terminal No. 2 and body g r o u n d .
S T A R T E R C U T RELAY 4P S O C K E T
1
2
4
3
Terminal side of female t e r m i n a l s
Is there continuity?
Y E S — R e p a i r a short in the wire between the under-
dash fuse/relay box and the starter. •
NO—Go to step 14.
14. Connect the BLK/WHT w i r e to the starter solenoid
S t e r m i n a l .
15. Connect the starter cut relay 4P socket t e r m i n a l s
No. 1 and No. 2 w i t h a j u m p e r w i r e , and t u r n the
ignition switch to START (III).
S T A R T E R C U T R E L A Y 4P S O C K E T
1
J U M P E R
2
WIRE
4
3
T e r m i n a l side of female t e r m i n a l s
Did the starter crank the engine?
Y E S — G o to step 16.
NO—Check for an open or short in the w i r e
between the under-dash fuse/relay box and the
starter. •
(cont'd)
4-7