3. SERVICE TABLES
CAUTION
Do not turn off the main power switch while the power LED is on or
blinking; otherwise, the memory may be damaged. Before turning off the
main power switch, press the power key on the operation panel and wait
until the power LED turns off.
NOTE: The main power LED is on or blinks under any of the following conditions:
• The platen cover is open.
• The copier is communicating with a network device.
• The copier is accessing the memory.
3.1 SERVICE PROGRAM MODE
3.1.1 SERVICE PROGRAM MODE OPERATION
IMPORTANT
Do not let the user have an access to the service program mode (SP mode).
Only service representatives are allowed to use the SP mode. Should the
user have an access to the SP mode, the normal operation of the machine
is NOT guaranteed any more.
Activating Fax SP Mode
1. Press the
key.
2. Press the following keys in the following order:
3. Press the
key and hold it down until the SP mode menus are displayed (for
about three seconds).
4. Press the key.
Quitting Fax SP mode
Press the key several times until you quit the fax SP mode.
SM
CÓPIA NÃO CONTROLADA
13
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Fax Unit