Rep 1.6 Front Cover Assembly; Rep 1.7 Left Front Cover - Xerox DocuPrint N2125 Service Manual

REP 1.6 Front Cover Assembly

Parts List on PL 1.1
Removal
Switch off the power and disconnect the Power Cord.
1. Open the Front Cover Assembly.
2. Slide the Cover Stopper to the left or right and remove from the right cover
3. Remove the K clip that secures the Front Cover Assembly to the left stud of the printer
(Figure 1).
4. Slide the Front Cover to the right and remove
Figure 1 Front Cover
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 1.6, REP 1.7
WARNING
(Figure
(Figure 1).

REP 1.7 Left Front Cover

Parts List on PL 1.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
1). 2. Remove the Front Cover Assembly
3. Remove the three screws securing the Left Front Cover
4. Use a small screwdriver to press on the locking tab and the remove the cover
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-8
WARNING
(REP 1.6).
(Figure 1).
Figure 1 Left Front Cover
(Figure 1).
Initial Issue
DocuPrint N2125