REP 7.21 Tray Separator Clutch
Parts List on
PL 7.10 Item 7
Removal
1.
Open the Tray.
2.
Open the separator cover.
3.
Remove the Separator Roller,
REP
4.
Remove the E-clip that secures the clutch to the shaft and slide the clutch off the shaft,
Figure
1.
Figure 1 Remove the Separator Clutch
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
7.20.
REP 7.22 Tray Front Cover
Parts List on
PL 7.10 Item 1
Removal
1.
Remove the Tray.
2.
Remove 2 screws (plastic) and release 4 hooks that secure the cover to the tray.
3.
Release the media level indicator from the opening and remove the cover,
5/2011
4-39
Figure 1
Repairs
REP 7.21, REP 7.22