Camshaft Installation - Honda GL1800 Service Manual

CYLINDER HEAD/VALVE
Install the following:
– two dowel pins
– new gasket
– front crankcase cover
– twelve bolts
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the camshafts (page 8-28).

CAMSHAFT INSTALLATION

• When either is serviced, the other cylinder head
cover must be removed and the other camshaft
position must be checked.
Install the valve shims in their original locations.
Coat the outer surfaces of the valve lifters with
molybdenum oil solution.
Install the valve lifters in their original lifter bores,
being careful not to damage the sliding surfaces of
the lifters and bores.
8-28
GASKET
RONT CRANKCASE COVER
HIM
AL E LIFTER
OWEL PINS