Camshaft Installation 8·19 - Honda C8R600F4 Service Manual

Install a new gasket onto the tensioner lifter.
Install the tensioner lifter onto the cylinder head
and tighten the two bolts with new sealing washers.
TORQUE:
10 N·m
(1.0
kgf·m '7 lbf·ft)
CAMSHAFT INSTALLATION
CAUTION:
Do not get molybdenum oil solution to the cam-
shaft holder mating surfaces and holder bolt holes.
It may fail to tighten the camshaft holder bolts for
correct torque value.
Install the valve shims in their original locations.
Coat the outer surfaces of the valve lifters with mo-
lybdenum oil solution.
Install the valve lifters in their original lifter bores,
being careful not to damage the sliding surfaces of
the lifters and bores.
Apply molybdenum oil solution to the camshaft
journals and cam lobes.
The camshafts
Install the camshafts onto the cylinder head with
have the
both No. 1 cam lobes facing up diagonally as
identification
shown.
marl<:
-IN: intake
- EX: exhaust
CYLINDER HEAD/VALVE
8-19