Crypto Key Pubkey-Chain Ssh - Dell PowerConnect M6348 Cli Reference Manual

User Guidelines
RSA keys are generated in pairs: one public RSA key and one private RSA key. If your switch
already has RSA keys when you issue this command, you are warned and prompted to replace
the existing keys. The keys are not saved in the switch configuration; they are saved in the file
system and the private key is never displayed to the user. RSA keys, along with other switch
credentials, are distributed to all units in a stack on a configuration save.
Example
The following example generates RSA key pairs.
console(config)#crypto key generate rsa

crypto key pubkey-chain ssh

Use the crypto key pubkey-chain ssh command in Global Configuration mode to enter public
key configuration mode in order to manually specify public keys such as SSH client public keys.
Syntax
crypto key pubkey-chain ssh
Default Configuration
By default, this command has no public keys configured.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enters the SSH Public Key-chain configuration mode.
console#configure
console(config)#crypto key pubkey-chain ssh
console(config-pubkey-chain)#user-key bob rsa
console(config-pubkey-key)#key-String
AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWlAl4kpqIw9GBRonZQZxjHKcqKL6r
MlQ+ZNXfZSkvHG+QusIZ/76ILmFT34v7u7ChFAE+Vu4GRfpSwoQUvV35LqJJk67IOU
/zfwOl1gkTwml75QR9gHujS6KwGN2QWXgh3ub8gDjTSqMuSn/Wd05iDX2IExQWu08l
1063