Snmp-Server Location - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
• The following example enables SNMP traps for host 192.16.12.143.
console(config)# snmp-server host 192.16.12.143
Dell_powerconnect traps v2
• The following examples allow spaces in the host name.
console(config)#snmp-server host "host name"
console(config)#snmp-server v3-host "host name"

snmp-server location

Use the snmp-server location command in Global Configuration mode to set the system
location string. To remove the location string, use the no form of this command.
Syntax
text
snmp-server location
no snmp-server location
text — Character string describing the system location. (Range: 1 to 255 characters.)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the device location as "New_York".
console(config)# snmp-server location New_York
1055