Show Logging - Dell PowerConnect M6348 Cli Reference Manual

User Guidelines
After entering the view corresponding to a specific syslog server, the command can be executed
to set the port number for the server.
Example
The following example sets the syslog message port to 300.
console(config-logging)#port 300

show logging

Use the show logging command in Privileged EXEC mode to display the state of logging and
the syslog messages stored in the internal buffer.
Syntax
show logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the state of logging and the syslog messages stored in the
internal buffer.
console#show logging
Logging is enabled.
Console Logging: level warning. Console Messages: 18 Dropped.
Buffer Logging: level info. Buffer Messages: 18 Logged,
File Logging: level notActive. File Messages: 19 Dropped.
CLI Command Logging : disabled
Web Session Logging : disabled
SNMP Set Command Logging : disabled
0 Messages were not logged.
1081