Snmp-Server View - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Global Configuration mode
User Guidelines
If the SNMP local engine ID is changed, configured users will no longer be able to connect and
will need to be reconfigured.
Example
The following example configures an SNMPv3 user "John" in group "user-group".
console(config)# snmp-server user John user-group

snmp-server view

Use the snmp-server view command in Global Configuration mode to create or update a Simple
Network Management Protocol (SNMP) server view entry. To delete a specified SNMP server
view entry, use the no form of this command.
Syntax
view-name oid-tree
snmp-server view
view-name
no snmp-server view
view-name — Specifies the label for the view record that is being created or updated. The
•
name is used to reference the record. (Range: 1-30 characters.)
oid-tree — Specifies the object identifier of the ASN.1 subtree to be included or excluded
•
from the view. To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4, or a word, such as system. Replace a single subidentifier with the asterisk (*)
wildcard to specify a subtree family; for example 1.3.*.4.
• included — Indicates that the view type is included.
• excluded — Indicates that the view type is excluded.
Default Configuration
A view entry does not exist.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
{ included | excluded }
oid-tree
[ ]
1057