Ip Dvmrp Metric; Ip Dvmrp Trapflags - Dell PowerConnect 8024 Cli Reference Manual

The following example sets VLAN 15's administrative mode of DVMRP to active.
console(config)#interface vlan 15
console(config-if-vlan15)#ip dvmrp

ip dvmrp metric

Use the ip dvmrp metric command in Interface Configuration mode to configure the metric for
an interface. This value is used in the DVMRP messages as the cost to reach this network.
Syntax
metric
ip dvmrp metric
no ip dvmrp metric
metric — Cost to reach the network. (Range: 1-31)
•
Default Configuration
1 the default value.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a metric of 5 for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip dvmrp metric 5

ip dvmrp trapflags

Use the ip dvmrp trapflags command in Global Configuration mode to enable the DVMRP trap
mode.
Syntax
ip dvmrp trapflags
no ip dvmrp trapflags
580
DVMRP Commands