Ip Dvmrp Metric - Dell Networking 2024 Reference Manual

Default Configuration
Disabled is the default configuration.
Command Mode
Global Configuration
Interface Configuration (VLAN) mode
User Guidelines
PIM must be disabled before DVMRP can be enabled.
Example
The following example sets VLAN 15's administrative mode of DVMRP to
active.
console(config)#interface vlan 15
console(config-if-vlan15)#ip dvmrp

ip dvmrp metric

Use the ip dvmrp metric command in Interface Configuration mode to
configure the metric for an interface. This value is used in the DVMRP
messages as the cost to reach this network.
Syntax
metric
ip dvmrp metric
no ip dvmrp metric
metric — Cost to reach the network. (Range: 1-31)
•
Default Configuration
1 the default value.
Command Mode
Interface Configuration (VLAN) mode
996
DVMRP Commands