RZ/A1L Group, RZ/A1LU Group, RZ/A1LC Group
22.6.7
Slave reception (single mode)
START
Set up the IEBBnPSR, IEBBnUAR,
IEBBnCKS, and IEBBnTMS registers.
Set the IEBBnBCR register to 88H
(separate communication).
Has IEBBTSTA
occurred (IEBBTV)?
Start interrupt servicing
(See 22.5.9 (3) "Interrupt servicing example".)
Has IEBBTD occurred?
Has IEBBTSTA
occurred (IEBBTV)?
End interrupt servicing
(See 22.5.9 (3) "Interrupt servicing example".)
END
Figure 22-54 Slave reception (single mode)
R01UH0437EJ0600 Rev.6.00
Jan 29, 2021
: Initial settings
:Slave reception enable
No
Start interrupt occurrence check
Yes
Yes
: Data interrupt occurrence check
No
No
: End interrupt occurrence check
Yes
Read the IEBBnDR register.
22. IEBus Controller
: Specify the 2nd
and following
bytes of data.
22-109