Chapter 1: Overview
LEDs
Alarm
Connectors
MAC Address
Tables
Management
Software
Management
Methods
Installation
Options
Additional
Features
24
The switches have the following LEDs:
Link/activity and duplex mode LEDs for the twisted pair ports on
the AT-IE200-6FT and AT-IE200-6GT Switches.
Link/activity and PoE status LEDs for the twisted pair ports on the
AT-IE200-6FP and AT-IE200-6GP Switches.
Link/activity LEDs for the SFP ports.
Fault and power supply status LEDs
The switches have two alarm connectors:
Alarm In connector for an external sensor, such as a motion
detector or door relay, to monitor the wiring closet or cabinet.
Alarm Out connector for an external alert device, such as a buzzer
or LED, for switch alarms.
Here are the basic features of the MAC address tables:
Storage capacity of 2,000 MAC address entries
Automatic learning and aging
The switches support the following management software and interfaces:
AlliedWare Plus management software
Command line interface
Web browser interface
You can manage the switches in the following ways:
Local management through the Console port
Remote Telnet or secure shell management
Remote HTTP or HTTPS web browser management
SNMPv1, v2c, or v3
The switches support the following installation options:
DIN rail installation (compatible with DIN 35x7.5mm rails)
Concrete or wood wall
Here are additional features:
Slot for USB flash memory
Reset button
Two DC power supply connectors