Leds; Alarm Connectors; Mac Address Tables; Management Software - Allied Telesis AT-IE300-12GP Installation Manual

Chapter 1: Overview

LEDs

Alarm
Connectors
MAC Address
Tables
Management
Software
Management
Methods
Installation
Options
Additional
Features
22
The switches have the following LEDs:
Link/activity and duplex mode LEDs for the twisted pair ports on

the AT-IE300-12GT Switch.
Link/activity and PoE status LEDs for the twisted pair ports on the

AT-IE300-12GP Switch.
Link/activity LEDs for the SFP ports.

Fault and power supply status LEDs

PoE LEDs on the AT-IE300-12GP Switch

The switches have two alarm connectors:
Alarm In connector for an external sensor, such as a motion

detector or door relay, to monitor the wiring closet or cabinet.
Alarm Out connector for an external alert device, such as a buzzer

or LED, to indicate switch alarms.
Here are the basic features of the MAC address tables:
Storage capacity of 16,000 MAC address entries

Automatic learning and aging

The switches support the following management software and interfaces:
AlliedWare Plus management software, version 5.4.6 or later

Command line interface

Web browser interface

You can manage the switches in the following ways:
Local management through the Console port

Remote Telnet or secure shell management

Remote HTTP or HTTPS web browser management

SNMPv1, v2c, or v3

The switches support the following installation options:
DIN rail installation (compatible with DIN 35x7.5mm rail)

Concrete or wood wall

Here are additional features:
Slot for USB flash memory

Reset button
