Shell; Speed - HP Enterprise FlexFabric 12900E Series Command Reference Manual

A password change does not take effect on the current session. It takes effect on subsequent login
sessions.
Examples
# Set the password to hello12345 for local password authentication on VTY line 0.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] authentication-mode password
[Sysname-line-vty0] set authentication password simple hello12345
Related commands
authentication-mode

shell

Use
shell
Use
undo shell
Syntax
shell
undo shell
Default
The terminal service is enabled on all user lines.
Views
User line view
User line class view
Predefined user roles
network-admin
Usage guidelines
The
undo shell
You cannot disable the terminal service on the user line you are using.
When the device acts as a Telnet or SSH server, you cannot configure the
If the
undo shell
command in the view of a user line in the class.
Examples
# Disable the terminal service for VTY lines VTY 0 through 4 so no user can log in to the device
through the user lines.
<Sysname> system-view
[Sysname] line vty 0 4
[Sysname-line-vty0-4] undo shell
Disable ui-vty0-4 , are you sure? [Y/N]:y
[Sysname-line-vty0-4]

speed

Use
speed
to enable the terminal service for user lines.
to disable the terminal service for user lines.
command is not supported in AUX line view or AUX line class view.
command is configured in user line class view, you cannot configure the
to set the transmission rate (also called the baud rate) on a user line.
71
command.
undo shell
shell