Port Link-Type - 3Com 8807 Command Reference Manual

Ethernet Port Configuration Commands 143
Parameter
vlan-id-list: vlan-id-list = [ vlan-id1 [ to vlan-id2 ] ]&<1-10>: Specifies which VLAN
the hybrid port will be added to. It can be discrete. The vlan-id ranges from 1 to
4,094. &<1-10> indicates that the former parameter can be input 10 times
repeatedly at most.
tagged: Packet of specified VLAN will have tag.
untagged: Packet of specified VLAN will not have tag.
Description
Use the port hybrid vlan command to join the hybrid port to specified existing
VLAN.
Use the undo port hybrid vlan command to cancel the hybrid port from the
specified VLAN.
Hybrid port can belong to multiple VLANs. If the port hybrid vlan vlan-id-list {
tagged | untagged } command is used for many times, the VLANs carried by the
hybrid port is the set of vlan-id-list.
This command can be used on condition that the VLAN specified with vlan-id must
have been existed.
Related command: port link-type.
Example
# Join hybrid port Ethernet2/1/1 to VLAN of 2, 4 and 50-100, and these VLAN will
have tags.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface ethernet2/1/1
[3Com-Ethernet2/1/1] port hybrid vlan 2 4 50 to 100 tagged

port link-type

Syntax
port link-type { access | hybrid | trunk }
undo port link-type
View
Ethernet port view
Parameter
access: Configures the port as access port.
hybrid: Configures the port as hybrid port.
trunk: Configures the port as trunk port
Description
Use the port link-type command to configure the link type of Ethernet port.