Display Rmon Alarm; Chapter 2 Rmon Configuration Commands - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON

Chapter 2 RMON Configuration Commands

2.1 RMON Configuration Commands

2.1.1 display rmon alarm

Syntax
display rmon alarm [entry-number ]
View
Any view
Parameter
entry-number: Alarm entry index, in the range of 1 to 65535. If you do not specify this
argument, the configuration of all alarm entries is displayed.
Description
Use the display rmon alarm command to display the configuration of a specified alarm
entry or all the alarm entries.
Related command: rmon alarm.
Example
# Display the configuration of all the alarm entries.
<3Com> display rmon alarm
Alarm table 1 owned by abc is VALID.
Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value
Table 2-1 Description on the fields of the display rmon alarm command
Alarm table
abc
VALID
: delta
: 1.3.6.1.2.1.2.2.1.11.67111554<ifInUcastPkts.67111554>
: 10(sec)
: 100(linked with event 7)
: 10(linked with event 8)
: risingOrFallingAlarm
: 0
Field
Alarm entry
Entry creator
Valid for alarm entries corresponding to the index
Chapter 2 RMON Configuration Commands
Description
2-1