Delete All Atm Addresses At Port; Stp: Static Atm Addresses Setup (1) Dad: Delete All Atm Addresses Of Port - 3Com CoreBuilder 9000 User Manual

140 C 6: M
HAPTER ANAGING
Delete All ATM
Addresses at Port
N I
ETWORK NTERFACES
Delete the ATM addresses registered at the specified port including those
registered by ILMI and those that were created manually through the
LMA. The addresses are deleted from the MIB at the port (they are
de-registered).
When you delete addresses from a specific port, any existing connections
associated with them are not deleted.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 4 2 1 3.1.2
The following message is displayed:
All ATM addresses for port 3.1.2 were deleted.
(4) S&C: Setup and Config Connections
(2) STP: Static ATM Addresses Setup
(1) DAD: Delete all ATM Addresses of
Port
Format or Range
<slot.group.port> or 0.0 for all ports
3 4 2 1 [parameters]
The ATM addresses at port are deleted.
All ATM addresses for port <x.x.x> were
deleted.