Display Ospf Lsdb - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Table 3-6 Description on the fields of the display ospf interface command

3.1.18 display ospf lsdb

Syntax
display ospf [ process-id [ area-id ] ] lsdb [ brief | [ asbr | ase | network | nssa |
router | summary ] [ ip-address | verbose ] [ originate-router ip-address |
self-originate ] ]
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command
applies to all current OSPF processes.
area-id: OSPF area ID, which can be a decimal integer (ranging from 0 to
4294967295) or in the form of an IP address.
brief: Displays brief statistics information about the link state database (LSDB).
Field
Cost
State
Type
Priority
Designated
Router
Backup
Designated
Router
Timers
Transmit Delay
3-21
Chapter 3 OSPF Configuration Commands
Description
Cost of the interface
State of the interface state machine
Network type of OSPF
Priority of DR for interface election
DR on the network in which the
interface resides
BDR on the network in which the
interface resides
OSPF timers, defined as follows:
Hell Interval
o packet
Dea Interval
d neighbors
Poll Interval of poll
Retr
Interval
ans
retransmitting LSA
mit
Delay time of transmitting LSA
of hello
of dead
of