Display Clock; Display Debugging; System Status/Information Display Commands - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – System Maintenance & Debugging

1.2 System Status/Information Display Commands

1.2.1 display clock

Syntax
display clock
View
Any view
Parameter
None
Description
Use the display clock command to display the current date and time of the system, so
that you can adjust them if they are wrong.
The maximum date and time that can be displayed by this command is 23:59:59
9999/12/31.
Related command: clock datetime.
Example
# Display the current date and time of the system.
<3Com> display clock
18:36:31 beijing Sat 2002/02/02
Time Zone : beijing add 01:00:00
Summer-Time : bj one-off 01:00:00 2003/01/01 01:00:00 2003/08/08 01:00:00
Table 1-1 Description on the fields of the display clock command
18:36:31 beijing Sat 2002/02/02
Time Zone
Summer-Time

1.2.2 display debugging

Syntax
display debugging [ interface interface-type interface-number ] [ module-name ]
Field
1-7
Chapter 1 Basic System Configuration &
Debugging Commands
Description
Current date and time of the system
Configured time zone information
Configured summer time information