Display Am User-Bind - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Port Security & Port Binding

2.1.3 display am user-bind

Syntax
display am user-bind [ interface interface-type interface-number | mac-addr
mac-addr | ip-addr ip-addr ]
View
Any view
Parameter
interface: Displays binding information on a specified port.
interface-type: Port type.
interface-number: Port number.
mac-addr mac-addr: Displays only the binding information of a specified MAC
address.
ip-addr ip-addr: Displays only the binding information of a specified IP address.
Description
Use the display am user-bind command to display port binding information.
Example
# Display the current system port binding information.
<3Com> display am user-bind
Following User address bind have been configured:
Mac
00e0-fc00-5101
00e0-fc00-5102
Unit 1:Total 2 found, 2 listed.
Total: 2 found.
The above output displays that two port binding settings exist on unit 1:
MAC address 00e0-fc00-5101 and IP address 10.153.1.1 are bound to
Ethernet1/0/1.
MAC address 00e0-fc00-5102 and IP address 10.153.1.2 are bound to
Ethernet1/0/2.
IP
10.153.1.1
10.153.1.2
2-3
Chapter 2 Port Binding Commands
Port
Ethernet1/0/1
Ethernet1/0/2