Manitowoc Grove GMK6300L Operating Manual page 414

Malfunctions in driving mode
7.6 Troubleshooting
Error messages
H
7 - 36
If ECOS detects an error, an error message is shown:
– lamp (1) flashes and
– lamp (2) flashes.
Open the Errors submenu for more information.
•
Press the button (2) once. The button is only active when the lamp (1)
flashes or lights up.
This opens the Errors submenu.
•
When all errors have been acknowledged, you can retrieve any pending
errors using the buttons next to the symbols (1) and (2).
1 Next error
2 Previous error
Every time you press the button, the next error will be displayed.
When you keep the button pressed, all errors are shown one after the other
continuously.
If not all errors have been acknowledged, the buttons
function – the symbols are grey.
Display of error/total errors
Display (2) shows the error total and display (1)
shows which error is displayed.
3/5, for example, means:
– Error 3 is shown
– There is a total of 5 errors.
If the error shown is not acknowledged, the
lamp next to the button (3) lights up.
To acknowledge the error
•
Press the button (3) once.
If there are further errors, the next error is
displayed and can be acknowledged.
3 112 xxx en
8 9
and have no
Operating Manual GMK6300L