Malfunctions On The Ecos Carrier - Manitowoc Grove GMK6300L Operating Manual

7.6.11
ECOS programme
version
General
malfunctions
Malfunction
Ignition on – ECOS display
does activate
H
Operating Manual GMK6300L

Malfunctions on the ECOS carrier

This section contains general malfunctions and malfunctions that generate
an "error" display.
Always note down the number of the program version after a malfunction
occurs before notifying Manitowoc Crane Care.
•
If required, open the main menu
The display (1) shows the number of the current program version.
The following table contains information on troubleshooting and possible
solutions.
Fuse F1/5, F4/6 blown.
If further malfunctions occur, the appropriate error messages are shown in
the ECOS display.
ö
.
Cause
3 112 xxx en
Malfunctions in driving mode
7.6 Troubleshooting
Remedy
Replace the blown fuse;
à
p. 7 - 20.
s
7 - 35