Switching Off The Engine; During Normal Operation, With The Ignition Lock/With The Hand-Held Control - Manitowoc Grove GMK6300L Operating Manual

10.3
10.3.1
G
After switching off
Operating Manual GMK6300L

Switching off the engine

During normal operation, with the ignition lock/with the
hand-held control
Risk of accidents due to suspended loads!
Never switch off the engine whilst a load is suspended. You must have the
control levers at hand in order to intervene at any time.
Always set down the load before you leave the crane cab.
If the hand-held control is not connected:
•
Turn the ignition key to position 0 – the engine will stop.
If the hand-held control is connected:
•
Press the (1) button once – the engine will switch off.
It is not possible to switch off the engine with the ignition lock
Observe the notes in the appropriate sections;
à
In case of short work breaks , p. 11 - 129,
à
In case of work breaks of more than 8 hours , p. 11 - 130.
Starting/switching off the engine – for crane operation
3 112 xxx en
10.3 Switching off the engine
10 - 21