Settings And Displays For Crane Operation; Inclining The Crane Cab; Setting Idling Speed - Manitowoc Grove GMK6300L Operating Manual

11.4
11.4.1
G
11.4.2
Operating Manual GMK6300L

Settings and displays for crane operation

This section only describes settings and displays needed during crane
operation. Operating elements that can be assigned to other procedures
are described with the corresponding procedures.

Inclining the crane cab

With the appropriate equipment, you can incline the crane cab to the rear in
order to attain a better sitting position when working at great heights.
Risk of accidents due to objects overturning in the crane cab!
Close the crane cab door before inclining and remove all loose objects
(e.g. bottles) from the crane cab.
This prevents objects from tipping over, the crane cab door opening by
itself, and unintended operational accidents caused by fright.

Setting idling speed

à
Setting idling speed , p. 10 - 16.
11.4 Settings and displays for crane operation
(A) – Incline to the rear
•
Close the crane cab door.
•
Press button (1) down.
(B) – Incline to the front
•
Close the crane cab door.
•
Press button (1) up.
The crane cab will tilt as long as you hold the
button down or until its end position is
reached.
3 112 xxx en
Crane operation
11 - 103