Manitowoc Grove GMK6300L Operating Manual page 288

Driving modes
6.3 Rigging work for driving with a trailer
Adjusting axle
pressure
Driving with
changed axle
pressures
Adjusting axle
pressure for
on-road driving
6 - 16
•
Tap the button
– (1) to increase the axle pressure,
– (2) to reduce the axle pressure.
The set axle pressure may not exceed 80 bar (1,160 psi).
The truck crane may only be driven with changed axle pressures if the main
boom is set down on a trailer (dolly).
If you would like to drive the truck crane without a trailer (dolly), then you
must adjust the on-road level;
à
p. 5 - 17.
3 112 xxx en Operating Manual GMK6300L