Manitowoc Grove GMK6300L Operating Manual page 933

Error code
8 01 1
8 02 2
8 03 3
8 14 1
8 14 2
8 14 3
8 14 4
Operating Manual GMK6300L
Cause
Rigging state not confirmed
RCL is overridden
Slewing gear switched on with
RCL code for working position
0° , 180° or Free-on-wheels
Maximum permissible overall
1)
height exceeded
Maximum permissible overall
working radius exceeded
Maximum permissible overall
slewing range exceeded
Shutdown range of a moni-
tored object reached
1)
With working range limiter switched on
14.4 Finding and eliminating malfunctions
à
Confirming the rigging mode ,
p. 11 - 29.
Cancel override;
Switching off the slewing gear
Retract or lower.
Raise or retract.
1)
Slew into a permissible working
1)
range.
Move into a permissible working
1)
range.
3 112 xxx en
Malfunctions during crane operation
Remedy
à
p. 11 - 40.
s
14 - 33