Manitowoc Grove GMK6300L Operating Manual page 784

Rigging work
12.5 Starting the engine for driving for rigging work
12.5.2
Prerequisites
Starting the
engine
Switch the engine
off
12 - 26
Starting/switching off the engine from the outrigger control
units
The following requirements must be met before you can start the engine for
driving from the outrigger control units:
– The ignition in the driver's cab must be switched on.
– The ignition in the crane cab must be switched off.
– The lamp in the button (1) lights up.
All activities and checks required to start the engine must be carried out
before starting the engine;
•
Press the button (3) once – the engine will start.
•
Press the button (1) once – the engine will switch off.
à
p. 4 - 1.
3 112 xxx en Operating Manual GMK6300L