Malfunctions Of The Outriggers - Manitowoc Grove GMK6300L Operating Manual

14.4.13
Malfunction
Outrigger cylinders and
beams can neither be
extended nor retracted and
the inclination indicator does
not work
When operating with the
hand-held control
When operating from the
crane cab
When operating from the
control units
None of the specified causes
apply
Operating Manual GMK6300L

Malfunctions of the outriggers

Driver's cab: Fuses A3F3,
A3F13, A3F14 blown
Driver's cab: Fuse A2F3 blown
Hand-held control connected
to the superstructure or a
bridging plug not inserted
Display fields switched off.
Hand-held control connected
to the superstructure or a
bridging plug not inserted
Solenoid valves not working
14.4 Finding and eliminating malfunctions
Cause
3 112 xxx en
Malfunctions during crane operation
Remedy
Replace blown fuse;
à
p. 7 - 20.
Replace blown fuse;
à
p. 7 - 20.
Disconnect hand-held control
or insert bridging plug;
à
p. 12 - 21.
Switch on display fields;
à
p. 12 - 31
Disconnect hand-held control
or insert bridging plug;
à
p. 12 - 21
Manitowoc Crane Care
Report it
14 - 25