Switching off
H
Setting the
remaining run
time
Operating Manual GMK6300L
This section only describes how to switch off the heater manually. If the aux-
iliary heater was switched on automatically, it will be switched off after a
particular heating period. You can set this heating period;
heating period , p. 11 - 139.
•
To switch off, press the button (1) once. The auxiliary heater is switched
off immediately.
If you turn off the ignition while the auxiliary heater is in operation, the aux-
iliary heater continues to run for a certain period of time. You can set this
à
remaining time;
If the ignition is turned off while the auxiliary heater is running, the heating
system will continue to run for the remaining run time.
•
Switch on the heating system using button (1).
•
Switch off the ignition.
The heating system will continue to run and the last set remaining time will
flash, e.g. 48 minutes.
•
Set the desired remaining time on the flashing display – button (1) or (2).
You can set a remaining time of 1 to 120 minutes.
•
Wait for 5 seconds until the current time is displayed.
The remaining time is now set.
Setting the remaining run time , p. 11 - 141.
3 112 xxx en
11.7 Heating and air-conditioning system
à
Crane operation
Setting the
11 - 141
Need help?
Do you have a question about the Grove GMK6300L and is the answer not in the manual?