Separate Steering; Switching To Separate Steering - Manitowoc Grove GMK6300L Operating Manual

Hide thumbs Also See for Grove GMK6300L:
Table of Contents

Advertisement

5.5
5.5.1
G
Operating Manual GMK6300L

Separate steering

There are two steering modes with separate steering.
– Driving around corners:
When the separate steering is switched on, the steering angle is larger
than for normal steering mode – the turning circle is smaller.
– Crab travel mode:
When the separate steering is switched on, the truck crane drives side-
ways if you turn the wheels of the front and rear axle lines in the same
direction.
Open the main menu, if necessary.

Switching to separate steering

Always switch to separate steering when
– Driving with the rigged truck crane
– Steering at low speed.
Risk of accidents when driving on-road with unlocked steering!
After driving with separate steering, change over immediately to normal
steering mode. The locking status for normal steering mode is only
restored once the on-road driving symbol is displayed.
You can only change over to separate steering when the current speed is
below approx. 5 km/h (3 mph).
3 112 xxx en
Driving
5.5 Separate steering
s
5 - 71

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Grove GMK6300L and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Grove gmk6300l-1

Table of Contents

Save PDF