Manitowoc Grove GMK6300L Operating Manual page 257

Cooling
Drying
Operating Manual GMK6300L
The illustration shows only a sample setting. Always adjust the setting to
the current conditions.
•
Switch the air conditioning on – the lamp (4) lights up.
•
Turn the switch (3) as far as it will go, to Cold .
•
Turn the switch (1) to the desired level – with recalculated air, you will be
able to cool more quickly, but no oxygen is fed in.
•
Set the air distribution with switch (2) – open the air vents if necessary;
à
p. 5 - 76.
You can dry the air in the driver's cab.
•
Switch the air conditioning on – the lamp (4) lights up.
•
Turn the switch (3) as far as it will go, to Warm .
•
Turn the switch (1) to the desired level – adjust the fresh air/recalculated
air setting to the current conditions (humidity and temperature of the
outside air).
•
Set the air distribution with switch (2) – open the air vents if necessary;
à
p. 5 - 76.
When drying, the air-conditioning system and the heating system work
against each other. After drying, switch off the device that you do not
require.
3 112 xxx en
5.6 Heating and air-conditioning system
Driving
5 - 79