Manitowoc Grove GMK6300L Operating Manual page 167

H
H
Operating Manual GMK6300L
If the lamp (1) does not go out, there is a malfunction in the flame start
à
system; p. 7 - 27.
•
Wait until the lamp (1) goes out.
•
Do not press the accelerator.
•
Turn the ignition key to position 3 and hold it there until the engine starts.
•
Let go of the ignition key after the engine starts.
•
If the engine does not start, release the ignition key after approx.
15 seconds and wait one minute before trying again.
If the engine does not start after multiple attempts;
engine , p. 7 - 27.
Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
3 112 xxx en
à
Malfunctions on the
4 - 17