Malfunctions Ecos - Superstructure - Manitowoc Grove GMK6300L Operating Manual

14.4.15
ECOS programme
version
General
malfunctions
Malfunction
The ECOS display remains
dark although the ignition is
switched on
H
Operating Manual GMK6300L
Malfunctions ECOS – superstructure
This section contains general malfunctions and malfunctions that generate
an "error" display.
Always note down the number of the program version before notifying
Manitowoc Crane Care in the event of a malfunction.
•
If required, open the main menu
The display (1) shows the number of the current programme version.
The following table contains information on troubleshooting and possible
solutions.
Fuse F1/1, F1/2 blown.
Fuses F2/1, F2/2, F3/1,
F3/6 blown.
One or more fuses on the cir-
cuit board in the distribution
box are blown.
Other malfunctions on the ECOS generate corresponding error messages.
14.4 Finding and eliminating malfunctions
ö
.
Cause
3 112 xxx en
Malfunctions during crane operation
Remedy
Replace the blown fuse;
à
p. 14 - 6.
s
14 - 35