Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1263

3
CAUTION:
Be sure that there is no gap between the HDD
Connector and the Conversion Connector.
1x
4
NOTE:
Use the 2 screws (P Tightening; M3x8) included with the
Removable HDD Kit.
P Tightening ; M3x8
2x
CAUTION:
• Be sure to firmly hold the Connector Fixation Block
when tightening the screws.
• Be sure to follow the correct order to tighten the
screws, otherwise the Conversion Connector may
not be connected properly, resulting in poor
contact.
5
NOTE:
Write down the serial number of the host machine to the
label for recording the number, and affix it to the area
indicated in the figure.
Serial No.
1249
9. Installation
HDD No.
XXXXXXXX