Canon imageRUNNER ADVANCE C5500 Series Service Manual page 1276

9
CAUTION:
• Be sure to connect the communication cable to the
correct port.
• Be sure to connect the iVDR Cable 1 (Red) (A:
HDD-Sig1/Pow1) to [A] on the Controller PCB.
• Be sure to connect the iVDR Cable 2 (Blue) (A:
HDD-Sig2/Pow2) to [B] on the Controller PCB.
2x
4x
[A]
[B]
[A]
[B]
1262
10
CAUTION:
• Be sure to insert the Main Controller PCB 1 until it
stops.
• Be sure to push [A] part hard to install it, otherwise
the connector may not be connected properly.
[A]
1x
1x
■ Assembling and Installing the
Option HDD
NOTE:
Install the 2 Option HDDs according to the steps 1 to 4.
9. Installation