Section 16 D/A Converter
16.4
D/A Output Control
In the H8/3052BF, D/A converter output can be enabled or disabled in software standby mode.
When the DASTE bit is set to 1 in DASTCR, D/A converter output is enabled in software standby
mode. The D/A converter registers retain the values they held prior to the transition to software
standby mode.
When D/A output is enabled in software standby mode, the reference supply current is the same as
during normal operation.
Rev. 3.00 Mar 21, 2006 page 550 of 814
REJ09B0302-0300